12
LED Indicator
The multi colour LED adjacent to the
Run/Standby
button indicates the status of the pump, as follows:
Mattress/Seat Status
There are five mattress/seat mode icons which can be
displayed, as follows:
Select Button
The function of the
Select
button depends on the pump
control change being carried out and the icon that is
displayed on the LCD screen directly above the button.
Mode Selection Icon
This “double-arrow” icon indicates that the pump is in
normal therapy mode, and pressing the
Select
button
below it will select either the
Weight Range
icons or
the
Mode
icons.
When the
Weight Range
or
Mode
is being changed, the
Mode Selection
icon changes to a “tick” and flash.
Pressing the
Select
button under the “tick” confirms the
new selection.
If the
Select
button is not pressed for five seconds
when the flashing “tick” is displayed, the requested
pump status change is ignored, the “tick” reverts
back to the
Mode Selection
icon and the pump
continues in its current state.
Amber
(Constant)
External power is applied to the
pump, but the pump is in
Standby
.
Green
(Constant)
The pump is in
Run
mode and
operating.
Red
(Flashing)
The pump has detected an alarm
condition.
Mattress
Backrest Horizontal
Active (Alternating) Mode
Mattress
Backrest Horizontal
Reactive (CLP) Mode
Mattress
Backrest Raised
Active (Alternating) Mode
Mattress
Backrest Raised
Reactive (CLP) Mode
Seat
Active (Alternating) Mode
