001.10610.EN rev
. 13
Disassembling the EASYTRACK
13
17) Once the post is loose enough to allow you
to move the post, slide the top portion of the
post down as follows:
a) Slide the handle
back into the bottom
part of the post.
b) Slightly raise the top
portion of the post.
c) Press in metal pin on
both sides of the
post.
Fig. 47
NOTE:
Metal pins cannot be pressed in
when there is downward pressure on them.
Pressure must be released to press in pin.
d) Push top portion of
post downward.
e) Repeat until the
metal pins are no
longer visible and
the top of the post is
only
152 - 200 mm
(6 - 8”) above the
blue locking handle.
Fig. 48
18) Remove the top plate from the post by
pressing up evenly.
19) Remove the post from
the foot plate by stepping
on both sides and pulling
the post up.
Fig. 49
20) Repeat from step (15) for the remaining two
post.
21) Place all pieces into a box or a bag to
protect them from dust and / or damage.
Summary of Contents for EASYTRACK 9330010
Page 4: ...Page intentionally left blank...
Page 22: ...Page intentionally left blank...
