Arjo AtmosAir 9000A, Instructions For Use Manual

Page: 21 / 316

17
Electromagnetic Compatibility
Although this equipment conforms with the intent of the directive 89/336/EEC in relation
to electromagnetic compatibility (EMC), all electrical equipment may produce interference.
If interference is suspected, move equipment away from sensitive devices or contact
the manufacturer.
3RUWDEOHDQGPRELOH5)FRPPXQLFDWLRQVHTXLSPHQWFDQDႇHFWPHGLFDOHOHFWULFDOHTXLSPHQW
5DGLRVFHOOSKRQHVDQGVLPLODUGHYLFHVPD\DႇHFWWKLVHTXLSPHQWDQGVKRXOGEHNHSW
at least 10.8 ft (3.3m) away from the equipment.
Medical electrical equipment needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information in the following tables.
7KHIROORZLQJWDEOHVGRFXPHQWFRPSOLDQFHOHYHOVDQGJXLGDQFHIURPWKH,(&
2007 Standard, for the electromagnetic environment in which the AtmosAir MRS should be
used in a clinical environment.
Guidance and manufacturer’s declaration - electromagnetic emissions
7KH$WPRV$LU056LVLQWHQGHGIRUXVHLQWKHHOHFWURPDJQHWLFHQYLURQPHQWVSHFL¿HGEHORZ7KHFXVWRPHURUXVHURI
the AtmosAir MRS should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment
RF emissions
CISPR 11
Group 1
The AtmosAir MRS uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to cause
anyinterference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Class B
9ROWDJHÀXFWXDWLRQV
ÀLFNHUHPLVVLRQV
IEC 61000-3-3
Yes