AS2300 Series Addressable Loop Powered Sounders & Sounder-Beacons
Installation Instructions
8
6
5
(4)
OUT+
(3) IN+
/L+
(2) -/L-
(1)
a
7
S
a
b
(+)
L2
(-)
L1
a
b
c
1 2 3 4 5 6 7 8
1 2 3 4 5 6
NL
PT
EN
DE
IT
PL
LT
RU
SK
HU
EN
Installation instructions
Description
This document includes installation information for Aritech
AS2300 series addressable, loop powered sounders and
sounder/beacons.
AS2300 series sounders and beacons are designed for use in
Aritech analogue addressable fire systems running the 2000
Series protocol.
The sounders can be put into different operating modes.
To avoid sound interference between devices in the same
locality, the sounders are synchronised automatically.
Installation
The AS2300 series is polarity sensitive.
Drill out the cable entries and mounting holes as required on
the base. (See figure 1b.) A 20mm hole cutter must be used for
the deep base cable entries since attempting to knock them out
may crack the base.
Secure the base to the mounting surface with pan-head screws.
CAUTION:
This product must be installed by qualified
personnel adhering to the TS54-14 specification and
any other applicable local authority regulations.
1
2
3
4
FR
Issue 3.0 (July 2010) 18-187110-3
Copyright © 2010 UTC Fire & Security BV. All Rights Reserved
UTC Fire & Security BV.
Kelvinstraat 7, NL- 6003DH Weert, The Netherlands.
+31 495 45 67 35
+31 495 55 00 42
