11
Read the instructions and recommendations in these Installation and
Servicing Instructions carefully to ensure proper installation, use and
maintenance of the appliance.
Keep this manual in a safe place. You may need it for your own
reference while Servicing Technicians or your installer may need to
consult it in the future.
This is a combined appliance for the production of central heating (C.H.)
and domestic hot water (D.H.W.).
This appliance must be used only for the purpose for which it is
designed.
The manufacturer declines all liability for damage caused by improper
or negligent use.
No asbestos or other hazardous materials have been used in the
fabrication of this product.
Before connecting the appliance, check that the information shown on
the data plate and the Technical Information (Section 21) comply with
the electric, water and gas mains of the property. You will find the data
plate on the reverse of the control panel.
Do not install this appliance in a damp environment or close to
equipment which spray water or other liquids.
Do not place objects on the appliance.
Do not allow children or inexperienced persons to use the appliance
without supervision.
If you smell gas in the room, do not turn on or off light switches, use
the telephone or any other object which might cause sparks.
Open doors and windows immediately to ventilate the room.
Shut the gas mains tap (at or adjacent to the gas meter) or the valve of
the gas cylinder and call your Gas Supplier immediately.
If you are going away for a long period of time, remember to shut the
mains gas tap or the gas cylinder valve.
Always disconnect the appliance either by unplugging it from the
mains or turning off the mains switch before cleaning the appliance or
carrying out maintenance.
In the case of faults or failure, switch off the appliance and turn off the
gas tap. Do not tamper with the appliance.
For repairs, call your local Authorised Servicing Agent and request the
use of original spare parts. For in-guarantee repairs contact MTS (GB)
Limited.
Check the following at least once a year:
1 -
Check the seal of water connections, replacing the gaskets if
necessary.
2 -
Check the seal of the gas connections, replacing the gaskets if
necessary.
3 -
Check the general condition of the appliance and of the
combustion chamber visually.
4 -
Visual check of the combustion: clean burners if necessary.
5 -
With reference to point 3, dismantle and clean the combustion
chamber if necessary.
6 -
With reference to point 4, dismantle and clean the injectors if
necessary.
9. GENERAL INFORMATION
FOR THE INSTALLER
Summary of Contents for GENUS 30 Plus
Page 30: ...30 Airpressure Swi tch Ear th Ear th 13 Electrical System Diagrams FIG 12 4...
Page 62: ...62...
Page 63: ...63...
