38
39
MM
8. The height and the direction of the shower head are adjustable. Depress the release button and
slide the shower holder to the desired position. Move the hand shower to the desired angle. A
ratchet mechanism in the shower holder;
9. Press the button and turn off the product water supply valve before to get out of the shower;
PUMP FUNCTIONING (only for pump version models)
The pump is always on in the pump product version. The pump starts to work when the user switches
on the product and turns on the water supply valve.
DISPLAY
On the display, the user reads the following info:
- Temperature setting when the product is working properly;
- Co = Cold shower when the user gets “cold shower profile” (see. Programming shower profile set-
ting chapter);
- Error codes if there is some failure, below error code list for a quick diagnostic:
a. E1 = Current leakage error
b. E2 = NTC error
c. E3 = ELCB Hardware error
d. E7 = Frequency error
e. Together with Error code, Maintenance icon appears on the display every time the product
detects some failure
Anyway every time error code appears on the display, contact the service agent for repair. NEVER try
to repair the unit by yourself.
PROGRAMMING SHOWER PROFILE SETTING
Pressing
MODE
button the shower programming profile will be activated. Programming profile func-
tion allows to the user to memorize up to 3 shower temperature profile:
1. Shower profile 1
a. Firstly, press MODE button to start to operate the Programming Shower Profile and the shower
icon P1 will appear, temperature digits blink.
b. Pressing
or
the user changes its desired shower temperature setting.
c. Set the desired temperature, the temperature digits will blink for 3 sec. then it becomes fixed
and memorizing the temperature shower profile P1.
Every time the user will set P1 shower profile, he will take shower at the last P1 setting temperature.
2. Shower profile 2
a. From Shower profile P1 setting, pressing again MODE button the user will go to set Shower
Profile 2, The shower icon P1 disappears, the shower icon P2 will appear and temperature
digits blink.
b. Repeat the same actions (b, c) above illustrated on shower profile 1.
3. Shower profile 3
a. From Shower profile P2 setting, pressing again MODE button the user will go to set Shower
Profile 3, the shower icon P2 disappears, the shower icon P3 will appear and temperature
digits blink
b. Repeat the same actions (b, c) above illustrated on shower profile 1.
4. Shower profile cold shower
1
