2
3
EN
18. During lighting/thunder, switch off the electric supply to protect the shower unit against pos-
sible damage.
19. The earth continuity conductor of the electrical installation must be effectively connected to all
exposed metal parts of the appliance and services in the room, which the heater is to be installed
to conform to local regulations and ensure proper earthing/grounding for ELCB to be effective.
Symbol Meaning
Failure to observe this warning can result in injury, which may even be fatal in certain circumstances
Failure to observe this warning can msult in damage or injury, even to property; plants and animals
.Observe the product's general and specific safety instructions
.Ref Warning
Risk
Symbol
.
1 Do not open the appliance or remove from its
installation
Electrocution hazard due to the presence of live electrical
equipment. Personal injury -overheated burns caused by
components and wounds caused by sharp edges
.2
Do not start or stop the appliance by inserting/
pulling the power plug
Electrocution hazard due to damage to the power cord,
its plug or the socket
.3
Do not damage the power cable
Electrocution hazard due to bare live wires
.4
Do not leave objects on the appliance
Personal injury due to objects falling off the appliance as
a result of vibration
Damage to the appliance or other property due to
objects falling off the appliance as a result of vibration
.5
Do not climb onto the appliance
Personal injury due to falling off the appliance
Damage to the appliance or other property due to the
appliance itself detaching from its mounting
.6 Do not clean the appliance without having first
.isolated the electrical power supply to the unit
Electrocution hazard due to the presence of live electrical
equipment
.7 Install the appliance to a solid wall which is not
subject to vibration
Danger of the appliance falling off the wall due to
structural collapse
.8 Make the electrical connection with cables of
adequate cross-section
Danger of fire due to overheating of undersized electrical
wires
.9 Restore all safety and control functions after
working on the appliance and check that they
are operational before returning it to service
Damage or blocking of the appliance due to improper
control
.10 Drain all components containing hot water,
using the bleed cocks, before handling them
Danger of burns
.11 Descale the system as given in the products
"safety sheet"; when doing so, ventilate the
room,wear safety clothing, make sure not to mix
products, and protect the appliance itself and
any adjacent objects
Personal injury due lo contact of the skin and eyes with
add, inhalation or ingestion of noxious chemicals
Damage to the appliance and adjacent objects due to
corrosion by acid
.12 Do not use insecticides, solvents or aggressive
detergents to clean the appliance
Damage to plastic and painted parts and assemblies
GENERAL SAFETY STANDARDS
