32
ID
a. From Shower profile P3 setting, pressing again MODE button the user will go to set Shower cold
shower, the shower icon P3 disappears, P0 will appear on temperature digits. The user will take
the shower at inlet temperature (Show pict)
b. Pressing again “MODE” button the user exits from Programming Shower Profile function com-
ing back to manual temperature setting
ECO FUNCTION SETTING
Pressing
ECO
button, ECO function will be activated. The product will start to work on energy saving
mode decreasing the user household cost for taking shower guaranteeing the same and stable show-
er comfort.
a. Firstly, press
ECO
button to start to operate ECO function and the Eco icon will appear on the
display
b. Pressing
or
the user is able to set its desired temperature from
32
°
C
to
42
°
C
c. Pressing again
ECO
button the user exits from ECO function coming back to manual temperature
setting.
ELCB TEST (for ELCB models)
The built-in ELCB function will self-check every time before working, when the user turns “on” the
electricity on the main switch out of the shower and the ELCB led will light up. It is recommended
test at least once a month the correct ELCB functioning. After turn on the electricity and water supply:
1. Press the
TEST
button;
2.
ELCB led
and SAFETY CHECK led will go off;
3. Press the
RESET
button to resume back the power supply.
If the ELCB led blinks and SAFETY CHECK led blinks or ELCB led does not light up and SAFETY CHECK
blinks when the user presses the RESET button, the user has to switches off the main supply and con-
tact the service agent for repair. NEVER try to repair the unit by yourself.
CLEANING PRECAUTION
Do not use thinner, alcohol, petrol or any other organic solution to clean the set, use only a damp
cloth with mild detergent.
CLEANING THE FILTER REGULARLY
There are two filters located at the water supply valve, one is mesh filter (installed at the incoming
water supply); the other one is the built-in filter as shown in fig.5.
Clean the two filters regularly to prevent blockage. Remove the built-in filter by turning it anti clock-
wise as shown in fig.5 B1. Take out the filter and flush it with water to remove any trapped sediments,
as shown in fig.5 B2 - B3.
Note: the specification, actual product’s cosmetic design and accessories parts shown are correct at
the time of printing and may be subjected to change without prior notice.
Others
This innovative adjustable shower head has 5 and 3 different spray actions for constant temperature
and non-constant temperature models, respectively.
2
3
