Aristel
SLT70 OPERATION MANUAL
Aristel
, the Best
in Telecommunications
11
Setting Status — 08+ cfm Key + 3rd Group CO Delay Time (0~199) + cfm Key
Default: 016 (16*30ms=480ms, unit: 30ms)
Note: 1. If the telephone is used as extension of a KTS, you must do the above setting to
enable redialing, ARS/LCR and so on.
2. The telephone can be set two groups of dial_9 code (each group Max. 8 digits)
3. Press REDIAL Key to put in one unit “A”. If the 2nd &3rd Group CO Hunting
Code include “A”, this digit is freewill-number.
4. When Re-dialing, Dial-back (incoming, outgoing or VIP number), it defaults
the1st Group CO Hunting Code.
4.4.6 Busy Tone Parameter Setting
Setting Status — 09+ cfm Key + Busy Tone On-1 Detection Time (0~199) + cfm Key
Default: 023 (23*15ms=345ms, unit: 15ms)
Setting Status — 10+ cfm Key + Busy Tone Off-1 Detection Time (0~199) + cfm Key
Default: 023 (23*15ms=345ms, unit: 15ms)
Setting Status — 11+ cfm Key + Busy Tone On-2 Detection Time (0~199) + cfm Key
Default: 033 (33*15ms=495ms, unit: 15ms)
Setting Status — 12+ cfm Key + Busy Tone Off-2 Detection Time (0~199) + cfm Key
Default: 033 (33*15ms=495ms, unit: 15ms)
Note: The telephone can set two groups of Busy Tone Detection Parameters.
KTSs may have two kinds of Busy Tone, one supplied by the carrier, the other is
internal Busy Tone of the system. Some functions of this telephone can work in
conjunction with Busy Tone Detection Technology.
4.4.7 Transfer Key Flash Time Setting
Setting Status —13+ cfm Key + Flash Time (0~199) + cfm Key
Default: 010 (10*10ms=100ms, unit: 10ms).
4.4.8 Pause Time Setting
Setting Status —14+ cfm Key + Pause Time (0~199) + cfm Key
Default: 033 (33*30ms=990ms, unit: 30ms).
4.4.9 Ring off Time Setting
Setting Status —15+ cfm Key + Ring off Time (0~199) + cfm Key
Default under General Mode: 100 (100*10ms=1000ms, unit: 10ms)
Default under
Aristel
KTS Mode: 006 (6*10ms=60ms, unit: 10ms)
