Aristel
SLT70 OPERATION MANUAL
Aristel
, the Best
in Telecommunications
9
MUTE Key:
Press MUTE Key once means put in one unit of ring off (Refer to
Chart 4.4.9), fdisplayed as ” ”(SPACE).
3.
After DSS-defined-code setting, also do set the DSS Key’s function (Co. / Et.).
If set as “CO”, telephone can automatically add a CO Hunting code, then start dialing.
Using: 1.Press DSS Key directly to dial the DSS-defined-code.
E.G.: In
Aristel
KTS, the Function-code of meet-me-page is “# * ”, After define DSS5
Key as “# * ” and set DSS5 Key’s attribute as Ext., DSS5 can realize one-touch
function of meet-me-page.
2. This definition can be used in conjunction with ARS/LCR setting to achieve more
functions.
4.4 System Function Setting
4.4.1 ARS/LCR Setting
Setting Status — 00+ cfm Key +Initial Code (Max: 8 digits) + cfm Key
Note: 1. a: Means DSS Key no. DSS1~DSS3 can use this function.
Press corresponding DSS Key (DSS1~3) to make choice.
2. b: Means Initial Code group no.
Press
▲
/
▼
Key to change group no. Each DSS Key provides 30 (00~29)
groups.
3. If the Initial code of dialing number is the same as any one among group
no.00~29, the telephone will automatically add the corresponding
DSS-defined-code (this code can be put in flash, pause, voice ID and so on,
see Chart 4.3), then dialing.
4. DSS1-DSS3’s function should be defined as “CO” to enable ARS/LCR function.
4.4.2 Restricted Code Setting
Setting Status — 00+ cfm Key + DSS4+
Restricted number (Max: 8 digits) + cfm Key
10M01D
101-
a. 1
st
digit
b. (2
nd
+3
rd
) digits
a. 1
st
digit
10M01D
401-
b. (2
nd
+3
rd
) digits
