SLT70 OPERATION MANUAL
Aristel
Aristel
, the Best
in Telecommunications
8
4 Telephone Function Setting
Telephone Function Setting
Description:
1> Advanced telephone function settings.
2> During function setting, press del key to delete characters; Press
▼
/
▲
key to move the
cursor; Press cfm key to save current settings; Press prom key to cancel the last setting
and exit to main menu.
3> There are two kinds of setting method:
DSS Key Setting
: This method is to use prom Key to define DSS-defined-code directly.
System Function Setting
: This method is to use prom Key and function code to enable this
telephone’s special functions and parameter defining.
4.1 Enter Setting Status
Off hook —prom Key + pa cfm Key — Enter into Setting Status
Default password: 000000.
LCD Displays:
4.2 Exit Setting Status
Enter Setting Items
10
M01D
01-
SET
-
Ver. No
.
Ver. No
.
10
M01D
01-
SET
-
Setting Status — Off hook — Exit Setting Status.
4.3 DSS Key Setting
Setting Status — DSS Key + DSS-defined-code + cfm Key — Press
▼
/
▲
Key to
change DSS Key’s function (Co. / Ext.)
Note: 1. 15 DSS Key means the15 Memory Keys.
2.During setting DSS-defined-code, you may put in:
PAUSE Key: Press PAUSE Key once means put in one unit of pause time
(Refer to Chart 4.4.8). You may press PAUSE Key more than once
according to your requirement, displayed as ”P”.
REDIAL Key: Press REDIAL Key means voice Identification characters. While
finished dialing previous DSS-defined-code, you should dial next
code after Voice Detection, figured by”A”.
TRF/FL Key:
Press TRF/FL Key once means put in one unit of flash time (Refer
to Chart 4.4.7), displayed as ”F”.
