Arista CloudVision DCA-100-CV, Quick Start Manual

Page: 32 / 46

Description Indicator, Button, or Connector Number
Allows you to connect USB devices to the system. The port is USB
2.0-compliant. USB connector 8
Allows you to connect USB devices to the system. The port is USB
3.0-compliant. USB connector 9
The identification buttons on the front and back panels can be used to
locate a particular system within a rack. When one of these buttons is System identification button 10
pressed, the system status indicator on the back flashes until one of the
buttons is pressed again.
Press to toggle the system ID on and off. If the system stops responding
during POST, press and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC setup) press and hold
the button for more than 15 seconds.
Connects the optional system status indicator assembly through the
optional cable management arm. System identification connector 11
Integrated 10/100/1000 Mbps NIC connector. Ethernet connector 3 12
Integrated 10/100/1000 Mbps NIC connector. Ethernet connector 4 13
Up to two 550 W redundant AC power supplies. Power supply (PSU1 and PSU2) 14
DCA-100-CV Quick Start Guide
28