- 28 -
EN
NOTES ABOUT CHARGING AND AUTONOMY
Important!
Before using for the first time, you need to charge the appliance for at least 12 hours.
Anything less than this could affect the life of the batteries.
Subsequent charges need a maximum time of 3.5 hours to guarantee a full 1.5 hour cleaning cycle.
First charge time
12 h
Subsequent charge times
3,5 h
Autonomous operating time
90 min (including return to charging station)
Robot status
Display status (1)
While charging
The display will read “1111”, repeating from right
to left.
Low battery
The display will read “Lo”
Charge complete
The display will read “FULL”
If used correctly, the battery has a useful lifetime of hundreds of cleaning cycles.
To extend battery life as much as possible, keeping operating autonomy at the same level, you should
follow some important rules:
- use the Robot frequently;
- recharge the battery completely before every cleaning cycle;
- always keep the Robot connected to the power supply;
- if you do not intend to use the Robot for a certain length of time, charge the batteries completely, switch
off the appliance at the switch (Q), remove the batteries and store them in a cool, dry place;
- after a long period of disuse, charge the batteries fully before use.
Important!
Do not leave the batteries flat for a long period of time, since they could become dam-
aged.
Important!
Do not charge batteries at temperatures below 4°C or above 40°C.
If the battery should become flat, replace it with a new one, removing the battery cover (R) and taking
out the screws.
Ni-MH 14V 2000 mAH batteries are available from Authorised Assistance Centres.
