- 35 -
EN
TROUbLEsHOOTING
Code on the
display (1)
Cause
Solution
E01
Left wheel not working.
Check the left wheel.
E02
Right wheel not working.
Check the right wheel.
E04
The appliance body is raised.
Reposition the Robot on the floor.
E05
Defect in sensor beam for low
obstacles (T).
Clean the sensors and if the problem persists,
send for repairs.
E06
Defect in sensor beam for high
obstacles (E).
Check the sensitivity of the sensor beam and that
there are no foreign objects.
E07
Left brush not working.
Check the left brush.
E08
Right brush not working.
Right the left brush.
E09
Appliance body blocked.
Move the Robot and restart.
E10
The appliance body is set to
charge with the switch (Q) on
OFF.
Move the switch (Q) to ON.
E11
Product malfunction.
Switch off the appliance and contact an authorised
assistance centre.
E12
Product malfunction.
Switch off the appliance and contact an authorised
assistance centre.
E13
Product malfunction.
Switch off the appliance and contact an authorised
assistance centre.
E14
No battery or Robot off.
Make sure the batteries have been inserted or that
the on button is set to ON.
Icon (2) and
“!” on
Dust container full or suction
opening blocked.
Clean the dust container and suction opening.
Note:
if errors persist, reset the Robot from the switch (Q) in the bottom. If this does not work, contact
an authorised assistance centre.
