EN – 35
4.
Disconnect lower traction drive cable from upper
traction drive cable. See Figure 70.
5.
Loosen, but DO NOT remove shoulder bolt retaining
cable pulley to cable pulley bracket. See Figure 71.
6.
Remove belt cover. See Figure 7.
7.
Remove lower traction clutch cable hook from swing
gate. See Figure 72.
8.
Rotate unit to service position and remove bottom
cover. See
on page 7 and
9.
Remove traction drive cable.
Install Traction Drive Clutch Cable
1.
Rotate unit to service position and remove bottom
cover. See
on page 7 and
2.
Install traction drive cable end with spring hook onto
swing gate. See Figure 73.
Figure 70
Figure 71
WARNING:
AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Ensure that unit is secure and will not tip.
Figure 72
