EN – 25
12. Remove two hair pins retaining swing gate assembly
to swing gate pivot pin and remove pin. See Figure 45.
13. Disengage traction drive belt from traction drive pulley
and remove swing gate assembly. See Figure 46.
Install Swing Gate Assembly
1.
Position swing gate assembly inside frame.
2.
Reinstall traction drive belt on traction drive pulley.
3.
Reinstall pivot rod through swing gate and secure in
tractor frame with two flat steel washers and hairpin.
See Figure 47.
WARNING:
AVOID INJURY. Wear thick gloves;
traction drive pulley and engine sheave edges
are sharp.
Figure 45
Figure 46
WARNING:
AVOID INJURY. Wear thick gloves;
traction drive pulley and engine sheave edges
are sharp.
Figure 47
