44
(6). If you enter the preset number and press ‘enter’, the camera will move to selected preset No.
(7) It supports touring as per the preset numbers saved
(12) It is for calling the OSD menu from PTZ itself.
It is the serial port setup for the external device.
[1] RS-485: It is for ‘External keyboard’ and ‘PTZ. Since the setup is different as per the device,
please check their manual for Baud Rate / Parity / Stop Bit setup
[2] RS-232: Set up the following information before use.
∙ Baud Rate / Parity / Stop Bit
Serial port setup