Quick reference
00: C.S. Comms. 11= send out information about arming, disarming and alarms; 10 = only
send out the alarm information; 00= not net work.
01: Exit delay time. The time is double-digit (XX). The actual time is the product of XX times
5. The initialization value is 04 = 20 seconds.
02: Entry delay time (delay alarm). The time is double-digit (XX). The actual time is the
product of XX times 5. The initialization value is 06 = 30 seconds.
03: Sounder run time. The time is double-digit (XX). The actual time is the product XX times
20. The initialization value is 06 = 120 seconds
04: Watchdog time. The unit time is hours.
05:Watchdog start and stop time window. Default setting is from 8:00 to 20:00.
06: Set time to Arm. Press * or #, select the time point( 6 time points in all) enter the time
desired. To cancel this set, press Delete key. Refer to figure 11.
07: Set time to Dis-Arm. Press * or #, select the time point( 6 time points in all) enter the
Time desired. To cancel this set, press Delete key. Refer to figure 12.
08: Setting time and date. The system time should be set with Year-Month-Date-Hour-Minute
-Day using the numeric keypad of the panel.
7 = Sunday; 1 =Monday; 2 = Tuesday;
3 = Wednesday; 4 = Thursday; 5 = Friday; 6 = Saturday. (a 24 hour mode)
09: PIN code set, this a 6 digit code for the remote access, Keypad Dis-Arm. Enter the
required PIN No using the numeric keypad on the panel. Cancel the PIN No using the
Delete key on the panel.
10: Set number of ringing in times before answer.
11. Arming with sounder ON/OFF
0: no sounder when arming 1: sounder when arming
12: Two way communication
0: NO
1: YES
13: Engineer Option. Listen to dial out DTMF.
0 : NO
1: YES
14: Mains Fail alarm. The panel will alarm when mains power fails
0 : NO
1:YES
15: exit delay timer with sounder ON/OFF
0: ON
1:OFF
16: Phone line cut alarm:
0: NO
1: YES
17: periodical test at 24 hours:
0: NO
1: YES
Table of Contents
1 OVERVIEW............................................................................
1
1.1 Introduction ................................................................ ....................................1
1.2 Basic Principle of Operation ................................................ .............................1
1.3 Component Parts ..............................................................................................2
1.4 Optional Extra Detectors available.....................................................................2
2 DESCRIPTION.......................................................................3
2.1 The Keypad ...................................................................................... ...............3
2.2 The LCD Character details and description .........................................................4
3 INSTALLATION INFORMATION............................................9
3.1 The Basic Flow Chart ............................................................................ ...........6
3.2 Registering Key Fobs .................................................................................. .....7
3.3Registering Sensors ................................................................................... .......7
3.4 Installing Wired Detector ......................................................................... ........ 8
3.5 Checking Registration ............................................................................. ........8
3.6 Deleting Registered Key Fobs ..................................................................... ......9
3.7 Deleting Registered Sensors........................................................................ ..... 9
3.8 The Zone Setting and Allocation ............ ............................................ ...............9
3.9 The System Configuration Setting.................................................... ................11
3.10 The Phone Numbers Setting ............................... ......................... ..................13
3.11 The C.SvAccount Code Setting ............ ........................................ .................13
3.12 Deleting Zones ...................................................................... .......................14
3.13 Viewing The Recording Event Log............................................ ......................14
3.14 Setting Entry and Exit delay timer ............................................. ..................... 16
3.15 Sounder cutoff time..................................................................... ..................17
3.16 View detector's total in every zone............................................... ...................18
3.17 Speak and Listen in............................... ..................................... ...................18
3.18 record & play the voice message................... ................................... .............. 18
4 USER INFORMATION..........................................................19
4.1 Methods of Arming and Disarming.................................. .................................19
4.2 24 Hour Arming...............................................................................................20
M
D
H
M D
SET
TYPE
1 2 3 4 5 6 7
1 1:watchdog zone
0:not a watchdog zone
2 1:exit delay
0:no exit delay
3 1:entry delay
0:no entry delay
4 1:24 hours zone
0:not 24 hours zone
5 1:sounder when alarming
0:silent when alarming
6 1:armed zone
0:part armed zone
7 1:sensor in the zone
0:no sensor in the zone
4.3 Selectable Zone Arming............................................... ....................... ............20
4.4 Selectable Detector Alarming Local only or Local and C.S..................................20
4.5 Selectable Key Fob Requiring Assistance with/with out sounder.................. .......21
4.6 Omitting a Zone..................................................................................... .........21
4.7 Sounder or silent alarm setting................................................................ .........21
4.8 Access the Control Panel form a remote telephone(Mobile or Land line) .. ...........21
4.9 Listen in and speak through key fob.................................................................. 22
L OG
27
M
D
H
M D
1 2 3 4
1 1= local alarm only, when disarmed;
0=Normal detector
2 1= detector will be door bell, when disarmed; 0=not door bell
3 1= key fob request assistance with sounder; 0=key fob request assistance no sounder
4 1= display detector low v oltage on LCD;
0=Cancel detector low v oltage display
4.10 Alarm confirming ................................................................................ .........22
4.11 Detector battery lowvoltage display one the panel and introduction............... ....23
5 ZONE CONFIGURATION AND EXPLANATION................25
Quick refrence
...............................................
27
Summary of Contents for ZDAS-300
Page 2: ......
