Argosy HV359, User Manual

Page: 6 / 32

The Remote Control
2
The Remote Control
Using the Remote Control for the First Time
For the first time use of the remote control, pull out the tab to
enable the battery power of the remote control.
Changing the Battery of the Remote Control
If the battery becomes depleted, change the battery according to the following instructions:
Take out the battery holder
Turn the remote control on its back, and then press the tab
on the left side with fingernail
n
. Hold and pull at the
indentation
o
to take out the battery unit.
Load the new battery
(+ towards up)
The battery model of this remote control is CR2025. Refer to
the illustration to insert the battery accurately with the
positive terminal facing up – see illustration below.
Insert the battery holder
Place the new battery and make sure it is inserted and seated
securely.
Note:
• This device must be activated before it will respond to commands from the
remote control.
• When using the remote control, point the remote control towards the front
of this device.
• The icon will appear on the screen when a button of non-available
operation is pressed.