Argosy HV359, User Manual

Page: 15 / 32

Network Connection
11
10. This device will list available wireless networks. Select your network and press the
ENTER button.
Note:
To enter a username and password to login to a network volume, press the
ENTER button on the remote control. This will bring up a virtual keyboard
on this device TV display. Use the remote control buttons
and the ENTER button to select the necessary characters. The password
can use any combination of numbers and letters (lower case or caps). It can
also use periods. It cannot use extended punctuation characters (such as !, @,
#, $, %, &, etc.)
11. Configure the settings for connection mode, wireless SSID, and wireless security.
12. When the configuration is complete, this device will automatically connect to the
wireless network. If it connects successfully, you will see a message indicating "Test OK
and Show Net Info", and the Network Setup menu will display showing the IP address
used by this device.
13. Press the HOME button to return to Home Menu .
Connecting to this device from a Networked Computer
Note:
The network computer must be on the same subnet or network segment as this
device.
Manually mapping a drive letter from a Windows PC
1. If you have not already done so, connect this device to your TV.
2. Turn on your TV and change the input setting as needed to receive input from this device.
Refer to the manual that came with the TV if you are uncertain how to do this.
3. Activate this device by pressing the STANDBY button on the remote control.
4. When the Home Menu displays on the TV, select Setup and press the ENTER
button.
5. Select Network and press the ENTER button. The display will show the IP address
assigned to this device on your network.
6. Using a PC connected to the Network, right click on the Computer (Vista) or My Computer