SR1A-B2/HxLx-CE1017_Instruction manual for the use of_Gebrauchsanweisung_Návod k použití_31832500_5en_de_cz_07/2021
Page 9
www.argo-hytos.com
ENVIRONMENTAL PROTECTION
Spilled working fluid must be removed immediately, eg with suitable absorbents, contaminated objects in the vicinity must be
cleaned or disposed of. Contaminated objects and residues of leaked working fluid must be disposed of in accordance with the
applicable environmental regulations.
FIRST AID
In the event of personal contamination, the contaminated clothing must be removed immediately, the skin washed thoroughly with
soap, or treated with a suitable cream.
In the case of contact with eyes, rinse immediately with clean water and seek medical attention. Also see medical advice if the
working fluid is accidentally swallowed or in the event of an allergic skin reaction.
Repairs to a defective valve are performer only by the manufacturer. Remove residual working fluid from the now removed defective valve and pack
it to prevent mechanical damage and outer contamination of the package during transport. Send the packaged valve with a description of the defect
to the customer’s address.
The user is only entitled to replace the external valve seals, which are supplied as a set of spare parts.
The manufacturer provides a 1-year warranty for the new valve. However, the right to make a complaint may not be accepted by the manufacturer if
the valve is mechanically damaged, the sealing material is damaged by an aggressive liquid or if incorrect use of the valve, not in accordance with
these operating instructions has been proven.
6.6 Repairs carried out by specialist
The valve does not require maintenance during normal operation.
6.7 Product maintenance
A
seal set
can be ordered as a spare part:
6.8 Supplied spare parts
Position
Description of spare part
Specification
Order number
1
Housing seal
Dual-seal PU 13.47x15.87x3.1 Set 18775600
2
Mounting chamber seal
O-ring NBR 19.4x2.1
Seal storage conditions
are specified in ISO 2230 – Rubber products – Storage conditions:
The seals should be stored:
› In covered, dry and temperate areas at temperatures of +15 ... +25 °C (+59 ... +77 °F), away from direct heat sources
› Protected from the weather, from direct sunlight and ultraviolet radiation
› Undeformed, on a clean flat surface in the original packaging
› Out of reach of oil and chemicals
Rubber groups
Abbreviation of chemical name according to ISO 1629 Chemical composition
Length of storage
A
Polyurethane AU
Polyester urethane rubber
5 year
B
NBR
Butadiene acrylonitrile rubber
7 year
C
FKM / FPM (Viton)
Fluor elastomer
10 year
6.9 Product disposal
Remove the valve from the hydraulic circuit (see chapter Emergencies).
Remove as much residual working fluid from the valve as possible.
Dispose of the valve in an environmentally friendly manner in accordance with the applicable regulations.
The valve is mainly made of recyclable materials (carbon steel, housing – PE).
7. Manufacturer contact
ARGO-HYTOS s.r.o.
Dělnická 1306
CZ - 543 01 VRCHLABÍ
Czech Republic
Tel. +420 499 403 111
E-mail:
1
2
