Argo-Hytos EL7-I Series, Instruction Manual

Page: 18 / 60

Downloading a system
EL7-I_Pokyny_Instructions_Hinweise_19151_1en_de_cz_04/2021
Page 18
www.argo-hytos.com
- the application connects to the update server and selects the appropriate firmware for the given hardware
according to the type of electronics.
If a newer version exists, it will prompt an update.
- the update is started by pressing the Update button, it is automatic and requires no further action.
- during firmware updates, all LEDs on the electronics will flash and will continue until the recording
is completed.
- all electronics settings remain unchanged, the update does not change the user settings.
- do not minimize or quit the application during the update, this will abort the update and require a restart.
- upon completion the application issues information about
a successful or unsuccessful update.
- if the update fails, check that the device is connected to
the internet and the connection is of sufficient quality.
The size of the update package to be downloaded is 500 kB.
Firmware update
Warning!
Do not close or minimize the application during the update process. Re-start is neccesary after each update.
If the update is aborted and the connection tried again, the electronics will state that it does not have firmware and the
update will start again.
The firmware update does not delete or change user settings.
- the electronics record the most important parameters during operation for optimization. It records
the system information and in case of problems or abnormal behaviour, it is possible to send this log
to the manufacturer to find out about the defect.
- the log is downloaded itself and sent to the manufacturer, no user intervention is required, only
connection to the internet is needed. The size of the uploaded file is approximately 100 kB.
The system logs do not contain any information about the device on which the
EL7_mobile application is running, not user data or settings.
They only contain content dowloaded from the electronics memory.