Problem:
Background noise during phone conversations.
Cause:
The ARGARD M10 is designed for safety from propagating frequency waves.
It is designed to use the lowest transmission power (including the use of as little
battery power as possible) while still meeting the signal efficiency standards of
Bluetooth Class 2.
Solution:
For the best sound quality, wear the headset on the same side as
the mobile phone.
Problem:
The ARGARD M10 is automatically disconnected when not in use for over
90 minutes, or calls cannot be answered using the ARGARD M10.
Cause:
It is a normal feature of the headset that when not in use for over 90 minutes,
the headset enters energy saving mode. If the mobile phone does not support the use
of this mode, the ARGARD M10 will temporarily disconnect the signal.
Solution:
When there is an incoming call, press the
TALK
button once to reconnect
and answer the call (it may take 2-3 seconds to make the connection).
Problem:
The ARGARD M10 improperly performs a function, or the control buttons
don’t work correctly.
Cause:
This may be due to usage that is improper or at too high a temperature,
which can cause the processor chip to hang or malfunction.
Solution:
The ARGARD M10 should be reset. Press and hold down the Volume Up,
Volume Down, and Talk buttons simultaneously for approximately 10 seconds.
The red light will flash 3 times to indicate headset shutdown and reset. Then press
the Talk button once more to restart the ARGARD M10 for normal use.
16:17
Summary of Contents for M10
