ARGARD M10, Manual

Page: 13 / 28

5.2.3 Connecting Bluetooth with a mobile phone
Some mobile phone models support Bluetooth hand free profiles or have a function
to select the type of connection. When set to “Always ask before connection”,
the connection will be completed by either pressing the TALK button on the headset
or entering the Bluetooth menu, choosing a connecting device, then pressing “Yes”
or “OK” to confirm the connection. When the type of connection is set to
“Automatic without confirmation”, the system will make a connection automatically
after the pairing is complete.
Table of Status Indicator Lights
Power on Blue light, flashes 4 times
Power off Red light, flashes 3 times
Pairing mode Blue and red lights, alternating flashes
Pairing successful Blue light, flash 1 time
Standby mode Blue light, flash 1 time every 10 seconds
Low battery Red light, flash 1 time every 10 seconds
Charging battery Red light is on continuously
Charging completed Red light goes out
Incoming call Blue light, rapid flashes until the call is received
During a call Blue light, flashes 2 times every 10 seconds
Order Headset Status Headset Indicator Lights
1
2
3
4
5
6
7
8
9
10
08:09