ARGARD M10, Manual

Page: 16 / 28

Menu Functions
7.1 Quick Connect/Disconnect
If the mobile phone is already paired with the ARGARD M10, activate
Bluetooth on the mobile phone, and then do the following:
To turn on: press and hold the TALK button for approximately 2 seconds.
The blue light will flash 3 times.
To turn off: press and hold the TALK button for approximately 2 seconds.
The red light will flash 3 times.
7.2 One-touch On/Off
7.3 Volume Up/Down
The volume may be increased or decreased according to the wearer's preference:
To increase the volume: press the “volume up” button located on the right
side of the headset (when holding the headset with the TALK button turned
towards the user).
To connect: press and hold down the TALK button on the ARGARD M10
for approximately 2 seconds. When the blue light flashes 5 times, release
the button. The ARGARD M10 will connect to the mobile phone automatically.
To disconnect: press and hold the TALK button on the ARGARD M10 for
approximately 2 seconds. When the red light flashes 3 times, release the
button. The ARGARD M10 will disconnect from the mobile phone
automatically.