Areva MiCOM P341, Operation Manual

Page: 192 / 282

Operation Guide Relay Menu Database MiCOM P341
)*+,
P341/EN O/B11
APPENDIX A
Page 46/126
TYPE
VALUE/BIT MASK
DESCRIPTION
3
Espanol
G20
(Second reg, First Reg)
PASSWORD (2 REGISTERS)
0x0000, 0x00FF
First password character
0x0000, 0xFF00
Second password character
0x00FF, 0x0000
Third password character
0xFF00, 0x0000
Fourth password character NOTE THAT WHEN REGISTERS OF THIS TYPE ARE READ THE SLAVE WILL ALWAYS INDICATE AN "*" IN EACH CHARACTER POSITION TO PRESERVE THE PASSWORD SECURITY.
G21
IEC870 Interface
0
RS485
1
Fibre Optic
G22
PASSWORD CONTROL ACCESS LEVEL
0
Level 0 - Passwords required for levels 1 & 2.
1
Level 1 - Password required for level 2.
2
Level 2 - No passwords required.
G23
Voltage and V/Hz Curve selection
0
Disabled
1D
T
2
IDMT
G24
2 REGISTERS
UNSIGNED LONG VALUE, 3 DECIMAL PLACES High order word of long stored in 1st register Low order word of long stored in 2nd register Example 123456.789 stored as 123456789
G25
1 REGISTER
UNSIGNED VALUE, 3 DECIMAL PLACES Example 50.050 stored as 50050
G26
RELAY STATUS
0x0001
Out of Service
0x0002
Minor self test failure
0x0004
Event