Areva MiCOM P341, Operation Manual

Page: 148 / 282

P341/EN O/B11 Operation Guide
APPENDIX A Relay Menu Database
Page 2/126 MiCOM P341
Internal digital signals
This table defines all of the relay internal digital signals (opto inputs, output contacts
and protection inputs and outputs). A relay may have up to 512 internal signals each
referenced by a numeric index as shown in this table. This numeric index is used to
select a signal for the commissioning monitor port. It is also used to explicitly define
protection events produced by the relay (see the Event Data section of this Appendix).
DNP3.0 device profile document
This table defines all of the objects, functions and/or qualifiers supported.
Default programmable logic
This section documents the default programmable logic for the various models of the
relay. This default logic for each model of the relay is supplied with the MiCOM S1
Scheme Logic Editor PC support software.
References
Chapter 1 Introduction: User Interface operation and connections to the relay
Chapter 5 Communications: Overview of communication interfaces
Courier User Guide R6512
Modicon Modbus Protocol Reference Guide PI-MBUS-300 Rev E
IEC60870-5-103 Telecontrol Equipment and Systems – Transmission Protocols –
Companion Standard for the informative interface of Protection Equipment