Areva MiCOM P341, Operation Manual

Page: 147 / 282

Operation Guide P341/EN O/B11
Relay Menu Database APPENDIX A
MiCOM P341 Page 1/126
APPENDIX A
This Appendix is split into several sections, these are as follows:
• Menu Database for Courier, User Interface and Modbus
• Menu Datatype Definition
• Event Data for Courier, User Interface and Modbus
• IEC60870-5-103 Interoperability Guide
• Internal Digital Signals
• DNP3.0 Device Profile Document
•
Default Programmable Logic
Menu database
This database defines the structure of the relay menu for the courier interface, the
front panel user interface and the Modbus interface. This includes all the relay
settings and measurements. Datatypes for Modbus and indexed strings for Courier
and the user interface are cross-referenced to the Menu Datatype Definition section
(using a G Number). For all settable cells the setting limits and default value are also
defined within this database.
Note: The following labels are used within the database
Label Description Value
V1 Main VT Rating 1 (100/110V)
V2 Checksynch VT Rating 1 (100/110V)
V3 NVD VT Rating 1 (100/110V)
Ι 1
Phase CT Rating 1 or 5 (Setting 0A08)
Ι
2 Earth Fault CT Rating 1 or 5 (Setting 0A0A)
Ι 3 Sensitive CT Rating 1 or 5 (Setting 0A0C)
Ι 4
Mutual CT Rating 1 or 5 (Setting 0A0E)
Menu datatype definition
This table defines the datatypes used for Modbus (the datatypes for the Courier and
user interface are defined within the Menu Database itself using the standard Courier
Datatypes). This section also defines the indexed string setting options for all
interfaces. The datatypes defined within this section are cross-referenced to from the
menu Database using a G number.
Event data
This section of the appendix specifies all the event information that can be produced
by the relay. It details exactly how each event will be presented via the Courier, User
and Modbus interfaces.
IEC60870-5-103 interoperability guide
This table fully defines the operation of the IEC60870-5-103 (VDEW) interface for the
relay it should be read in conjunction with the relevant section of the Communications
Chapter of this Manual (Volume 1 Chapter 5).