Arecont Vision MegaDome
®
Installation Manual
3 | P a g e
8.
Reference
Image 5
for proper positioning of
the magnetic core.
9.
If you are using the side conduit opening,
remove the conduit plug by first removing the
socket set screw using one of provided Allen
keys
(Image 6)
.
Image 5
Image 6
Adjusting the Tilt, Pan, Z-axis (yaw) and Focus:
10. To adjust the tilt, use a #1 Phillips screwdriver
to loosen the screw on the side of the plastic
lens bracket 1/4 turn
(Image 7)
.
CAUTION:
Do not remove the screw!
11. Adjust lens tilt as required and tighten the
screw from
step 10
.
12. To adjust the pan, use a #2 Phillips
screwdriver to loosen the screw as shown in
Image 7
.
13. Adjust the pan as required and tighten the
screw from
step 2
.
14. To adjust the Z-Axis, or Yaw, for vertical wall
mounting, loosen the set screw as shown in
Image 7
.
NOTE: There are two set screws on
opposite sides; both need to be loosened.
15. Adjust the Z-Axis as required and tighten the
set screw back down.
Image 7
Z-AXIS
(yaw)
TILT
PAN
