Arecont Vision MegaDome
®
Installation Manual
11 | P a g e
MegaDome
®
Pole Mount Adapter (AV-PMA) Installation Instructions
Inside the box:
A. Pole Mount Adapter
B. 2x Small Steel Straps
C. 2x Large Steel Straps
D. Pack of four (4) machine screws (#8-32
5/8”)
Not included but needed:
#2 Phillips head screw driver
SV-JBA (Junction box adapter)
MD-WMT2 (MegaDome® wall mount)
Image 26
1.
Remove Pole Mount Adapter, steel Straps
and hardware from the box.
2.
Attach SV-JBA (Junction Box Adapter) to Pole
Mount Adapter as shown in
Image 27
.
3.
Remove the conduit plug on Junction box
adapter and connect ¾” NPT Conduit to
Junction Box Adapter shown in
Image 27-1
.
NOTE: Use silicon or water pipe seal tape to
make sure no water leakage between conduit
pipe and junction box adapter.
4. Run the Ethernet cable and outside power
cable (if necessary) through the Junction Box
Adapter and MegaDome® wall mount, MD-
WMT2.
5. Attach MegaDome® wall mount, MD-WMT2,
to Pole Mount Adapter as shown in
Image 28
.
6. Attach Dome to Wall Mount Adapter. Please
reference “
Mounting the Camera
”, if needed.
Image 27 Image 27-1
Image 28
