Arecont Vision MegaDome
®
Installation Manual
1 | P a g e
MegaDome
®
Installation Manual
Inside the box:
A. Arecont Vision MegaDome
®
B. Mounting template
C. Magnetic core
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. One double sided hex key
F. One single sided hex key
G. Security L-key
H. Power cable
Not included but needed:
#1 Phillips head screw driver
#2 Phillips head screw driver
Image 1
Mounting the Camera:
1.
Remove camera and hardware from the
box.
2.
Using the Mounting template, prepare the
mounting provisions for camera
installation.
NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
MegaDome
®
, align accordingly. If using
the side conduit hole, please see
step 9
below.
3.
Using Security L-key, loosen the four (4)
screws securing the dome cover
(Image
2)
. Remove vandal resistant dome
cover.
NOTE: Do not remove screws
from the dome cover.
Image 2
H
G
F
E
C
RJ-45
POWER
HOLE
A
D
B
