Arecont Vision MegaDome
®
Installation Manual
12 | P a g e
MegaDome
®
Corner Mount Adapter (AV-CRMA) Installation Instructions
Inside the box:
A. Corner Mount Adapter
B. Pack of four (4) machine screws (#8-32
5/8”), twelve (12) screws, twelve (12)
anchors, and twelve (12) washers
ot included but needed:
#2 Phillips head screw driver
SV-JBA (Junction box adapter)
MD-WMT2 (MegaDome® wall mount)
Image 29
1.
Remove Corner Mount Adapter and hardware
from the box.
2.
Attach SV-JBA (Junction Box Adapter) to
Corner Mount Adapter as shown in
Image 30
.
3.
Remove the conduit plug on Junction box
adapter and connect ¾” NPT Conduit to
Junction Box Adapter shown in
Image 30-1
.
NOTE: Use silicon or water pipe seal tape to
make sure no water leakage between conduit
pipe and junction box adapter.
4. Run the Ethernet cable and outside power
cable (if necessary) through the Junction Box
Adapter and MegaDome® wall mount, MD-
WMT2.
5. Attach MegaDome® wall mount, MD-WMT2,
to Corner Mount Adapter as shown in
Image
32
.
6. Using the screws provided (or other hardware)
to attach the Corner Mount Adapter to an
exterior 90° corner wall.
7. Attach the dome to wall mount adapter. Please
reference “Mounting the Camera,” if needed.
Image 30 Image 30-1
Image 31
