Arecont Vision MegaDome
®
Installation Manual
2 | P a g e
4.
Run Ethernet cable through the hole on the
bottom of the camera
(Image 3)
and plug it
into the RJ45 port.
NOTE: If the camera will
be powered via PoE, please skip to
step 6
.
5.
If the camera is powered by an outside power
supply, run the supplied power cable through
the hole and connect it to its respective
connector inside the camera
(Image 3)
.
NOTE: Make sure that your installation of
wires complies with Electrical Code of the
local government where the camera is
installed and no bare wires are exposed.
6.
Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood screws or any optional
hardware suitable for the mounting surface.
7.
Install the included magnetic core onto the
Ethernet cable as shown in
Image 4
.
NOTE:
Ensure both tabs are tightly secured.
Image 3
Image 4
HOLE
POWER
RJ-45
