Arecont Vision MegaDome
®
Installation Manual
9 | P a g e
MegaDome
®
Flush Mount Adapter (MD-FMA) Installation Instructions
Inside the box:
F. Flush Mount Adapter
G. White Trim Ring
H. Pack of four (4) machine screws and one
(1) I-Blot
I.
Mounting template
Not included but needed:
#2 Phillips head screw driver
Image 20
47. Remove Flush Mount Adapter, Trim Ring and
hardware from the box
48. Attach Dome to Flush Mount Adapter as
shown in
Image 21
. Please reference
“
Mounting the Camera
”, if needed.
49. Using the Mounting template, cut a hole in
surface for mounting.
50. Insert Flush Mount Adapter into the hole.
51. Screw the
“lever screws” until the FMA is
snuggly installed, as shown in
Image 21
. The
“Support Arm” will ride down the screw to
compress the mounting surface
.
NOTE: Do
not over-torque the lever screws
52. Attach the Trim Ring to the Flush Mount
Adapter by rotating clockwise as show in
Image 22.
Image 21
Image 22
B
C
A
Lever
screw
D
Support
Arm
