Arecont Vision SurroundVideo
®
WDR Camera Installation Manual
13 |
P a g e
AV12186DN / AV12366DN / MegaDome
®
Flush Mount Adapter (MD-FMA) Installation Instructions
Inside the box:
A. Flush Mount Adapter
B. White Trim Ring
Pack of four (4) machine screws (#8-32
½”) and one (1) I-Blot
C. Mounting template
Not included but needed:
#2 Phillips head screw driver
Image 26
1.
Remove Flush Mount Adapter, Trim Ring and
hardware from the box
2.
Attach Dome to Flush Mount Adapter as
shown in
Image 27
. Please reference
“
Mounting the Camera
”, if needed.
3.
Using the Mounting template, cut a hole in
surface for mounting.
4. Insert Flush Mount Adapter into the hole.
5.
Screw the
“lever screws” until the FMA is
snuggly installed, as shown in
Image 27
. The
“Support Arm” will ride down the screw to
compress the mounting surface
.
NOTE: Do
not over-torque the lever screws
6. Attach the Trim Ring to the Flush Mount Adapter
by rotating clockwise as show in
Image 28.
Image 27
Image 28
B
C
A
Lever
screw
D
Support
Arm
