Arecont Vision SurroundVideo
®
WDR Camera Installation Manual
12 |
P a g e
AV12186DN / AV12366DN / Junction Box Adapter (SV-JBA) for MD-WMT2 Installation Instruction
Caution:
SV-JBA should always be used with a wall
mount, MD-WMT2, for outdoor installation. SV-
JBA can only be installed with MD-WMT2 wall
mount. It does not work with camera dome,
older MD-WMT mount or MD-CMT!
Inside the box:
A. Junction Box Adapter
B. Pack of four (4) machine screws
(#8-
32 ½”)
C. One double-sided hex key
D. Pack of four (4) screws and four anchors
NOTE: Anchors and screws are good to be used for
concrete, wall block and red bricks. Screws by
themselves can be used in wood.
E. Mounting template
Not included but needed:
#2 Phillips head screwdriver
Wall Mount, MD-WMT
¾” NPT Conduit (if necessary)
Image 24
1.
Remove junction box adapter and hardware
from the box
Image 25
2.
Remove the conduit plug by first removing the
socket set screw using the provided hex key
(C).
3. Attach the junction box adapter to the wall
using drywall screws or any optional hardware
suitable for the mounting surface.
4.
Attach the wall mount to junction box adapter
then attach cap to the wall mount as shown in
Image 25
.
5
. Connect ¾” NPT Conduit to the junction box
adapter.
6. Run Ethernet cable and outside power cable
(if necessary) through the Junction Box
Adapter and Wall Mount.
7.
For installation of the camera, please
r
eference “
Mounting the Camera.
”
B
C
A
D
E
