APPENDIX
50
Help Command
This –h or –help command provides an on-line table of contents,
providing brief descriptions of the help sub-commands that the
oflashflash utility recognizes.
The command syntax for the oflash-h or -help command is as
follows:
\> oflash–h or -help --- display the oflashflash utility sub-command
option.
The below example shows that oflashflash utility oflash-h or –help
command gets detail information about its sub-command.
-
C:\>oflash
======================================
= Copyright (c) 2009 Areca, Inc. All rights reserved. =
= Areca SAS Host Adapter Flash Utility, Version: 1.04 =
======================================
command: oflash[options]
/c ctlr# -- assign controller number, default 0
/r filename -- read, backup binary into filename from flash
/w filename -- write, write binary into flash from filename
/l -- list, list all adapters found
Example:
Write flash from file i13_1330.bin into adapter#0
command: oflash/ /c 0 /w i13_1330.bin [Enter]
c:\>_
/l Command
This /l command uses to display the oflash-supported SAS host
adapter installed on your computer. Use this command to see which
SAS host adapters are installed, and to identify the ID numbers
assigned to each physical host adapter.
The command syntax for the /l command is as follows:
\> oflash/l --- list all SAS host adapters found.
This example shows a typical system response to a /l command:
C:\> oflash/l
Summary of Contents for ARC-1330 Series
Page 5: ......
