51
APPENDIX
/c Command
This /c command uses to select the host adapter for the /r read
command or /w write command.
The command syntax for the /l command is as follows:
oflash/c ctlr# --- Assign controller number, default number=0
ctlr# is the SAS host adapter IDs representing the set of adapter(s)
on which the command can be performed. By default, the oflash
flash utility value set is host adapter 0.
/r Commands
This /r command uses to saves the contents of a SAS host
adapter’s flash ROM contents into in a file. The name of the save
file is based on the command syntax filename.
The command syntax for the /r command is as follows:
oflash/c filename --- read, backup binary into filename from the
flash.
The below example shows that oflashflash utility saves the SAS
host adapter’s flash ROM contents from SAS adapter 1 to a file
name: 1330bak.bin.
C:\> oflash/c 1 /r 1330bak.bin
-
C:\>oflash/ l
======================================
= Copyright (c) 2009 Areca, Inc. All rights reserved. =
= Areca SAS Host Adapter Flash Utility, Version: 1.00 =
======================================
Adapter Information
Adapter
#00
Vendor ID/DeviceID/Bus/DevFunc: 17D3/1330/01/00 I/O Address: EFC80000
Adapter
#01
DeviceID/Bus/DevFunc: 1330/1/0 I/O Address: CF00
c:\>_
Summary of Contents for ARC-1330 Series
Page 5: ......
