User’s Ma
nual
–
A
REBO
S Stand fan 45 W
8
5.
Assembly
•
Take the device and its accessories out of the box. Remove sticker, protective foil or plastic
from the device.
•
Loosen and remove the four screws from the rods, cross the rods, place the extension tube
on the base and tighten the screws.
•
Loosen the screws on the housing by turning it to the left, attach the housing to the
extension tube and retighten the screws.
•
Mount the back safety guard and the motor so that the holes in the back safety guard sit
exactly on the pins of the motor housing. Place the back safety guard on the pins.
•
Attach the back safety guard to the motor housing using the rear safety guard locknut.
•
Place the blades on the axle so that the scroll slots fit on the axle pin, and fix the blades by
pressing the fan blade lock button.
•
Check the blades by hand rotation. Make sure that no friction occurs; if friction occurs,
repeat the previous steps one more time.
•
Mount the front guard using the brackets and the supplied screw on the back safety guard.
•
Plug the power cord into the power outlet. (
Note:
Make sure that the voltage displayed on
the device matches the local voltage before connecting the device).
6.
Use
•
Place the fan on a firm and stable surface.
•
Plug the power plug into an easily accessible power outlet.
Odor development at first commissioning:
•
At the first start-up of the fan, it may possibly lead to a slight odor development. This is
harmless and not due to a malfunction of the device.
•
If necessary, ensure adequate ventilation, e.g. by opening a window.
6.1 Set the ventilation level
•
Turn on the fan by selecting an operation level on the step switch (10).
The following levels are available to you:
Stage
Strength of the airflow
0
OFF
1
weak airflow
2
medium airflow
3
strong airflow
•
Use the speed control knobs (10) to select the desired ventilation level.
6.2 Oscillation function
•
If you want the fan to swing back and forth during operation, press down the oscillation knob
(8).
•
To exit the oscillation function, pull the oscillation knob (8) back up.
•
If you want to correct the airflow diagonally upwards or downwards, switch off the fan and
grasp the motor unit (14) with one hand and the safety guard with the other hand and tilt
the motor unit (14) to the desired position. The respective fixation levels are indicated by
clicking noises.
