Nailor AT303 Manual Download Page 1

Page: 1 / 93

SCHEDULE TYPE:
PROJECT:
ENGINEER:
CONTRACTOR:

Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.

DATE

B SERIES

SUPERSEDES DRAWING NO.

3 - 30 - 17

3000

3 - 21 - 13

30AT

Dimensions are in inches (mm)

SINGLE DUCT TERMINAL UNIT

ACCESSORY • DISCHARGE SOUND ATTENUATOR

MODELS: AT303 AND AT305

Accessories:

Accessories ordered as seperate models.

Options:

Steri-Liner.

Fiber-Free Liner.

Solid Metal Liner.

1" (25) Fiberglass Liner.

2" (51) Fiberglass Liner.

Perforated Metal Liner.

Steri-Liner with Perforated Liner.

Access Door

Sizes 4 to 12 : 8" x 5" (203 x 127) Oval;

Sizes 14 to 24 x 16: 12" x 6" (305 x 152) Oval.

Special Features: _____________.

Note: Select Insulation to match VAV terminal.

Dimensional Data

Unit

Size

4, 5, 6

10 (254)

12 (305)

7, 8

12 (305)

12 1/2 (318)

12 (305)

9, 10

14 (356)

12 1/2 (318)

12 (305)

18 (457)

12 1/2 (318)

12 (305)

24 (610)

12 1/2 (318)

12 (305)

28 (711)

12 1/2 (318)

12 (305)

24 x 16

38 (965)

18 (457)

12 (305)

L = 36" (914) OR 59" (1499)

SIDE VIEW

END VIEW

OPTIONAL ACCESS DOOR

AT Discharge Sound Attenuator (loose)

• 22 ga. (0.86) galvanized steel

construction.
•

Shipped loose for field

attachment.
• Slip and drive connection.
• 3/4" (14) dual density fiberglass

insulation, exposed edges

coated to prevent erosion as

standard.

AT303

3´ (916) Long -

Standard.

AT305

5´ (1524) Long -

Optional.

Special Features:

____________________ .

Summary of Contents for AT303






























































































Search results

Summary of Contents for AT303

Reviews:

Nailor AT303, Manual, Page: 1 / 93

Search results

Summary of Contents for AT303

Reviews: