User’s Ma
nual
–
A
REBO
S Stand fan 45 W
9
6.3 Adjustable the height
•
Risk of injury!
When setting the height, the telescopic tube (15), together with the motor
unit and the safety guard, can slide down causing bruising.
•
When adjusting the height, hold the motor unit with one hand if it is not in the lowest
possible position.
•
If you want to reset the fan height, proceed as follows:
-
Hold the motor unit (14) with one hand while loosening the height adjustment (11)
counterclockwise with the other hand.
-
When the fixation is released, raise or lower the telescopic tube (15) to the desired
height.
-
Retighten the extended telescopic tube (15) by tightening the height adjustment bracket
(11) clockwise.
7.
Cleaning and maintenance
•
Danger of short circuit!
Liquid that has entered the housing can cause a short circuit.
•
Before cleaning, disconnect the power plug from the socket.
•
Allow the fan to cool completely.
•
Use a soft, damp cloth to clean the housing and some soapy water to remove stubborn dirt.
Do not use gasoline, thinners or other solvents.
•
Clean the safety guard from the outside with a soft brush.
•
Never immerse the fan in water or other liquids.
•
Make sure that no liquid gets into the housing.
•
Then rub the fan dry.
8.
Transport and storage
8.1 Transport
•
Observe the following notes
before
each transport:
-
Turn off the device.
-
Disconnect the power cord from the wall outlet by grasping the power plug.
-
Do not use the power cord as a pull cord.
•
Observe the following notes
after
each transport:
- After each transport, place the fan upright.
8.2 Storage
•
Observe the following instructions
before
each storage.
•
When not using the device, observe the following storage conditions:
-
dry and protected from frost and heat.
-
in an upright position in a place protected from dust and direct sunlight.
-
if necessary with a cover protected from dust.
-
do not place any other devices or objects on the fan to prevent damage to the fan.
