Original User Manual
–
A
REBO
S SPA Pool
4
1.2 Specific safety instructions
•
This device was built according to the current state of the art and taking into account
the existing safety regulations. Nevertheless, this whirlpool can pose a hazard to
people and property if it is used improperly or not for the intended purpose or if the
safety and warning instructions are not followed.
1.2.1 Private Use
•
This whirlpool is intended for private use only.
•
Caution!
As a pool owner, you must comply with local and state laws
regarding child safety, safety barriers and other safety requirements.
Please contact the local building authority for further details.
1.2.2 Child safety
•
Risk of drowning!
It is important to ensure that children do not have
access to the whirlpool without supervision.
•
To avoid accidents, ensure that children are always supervised when using the spa.
•
Warning!
Make sure that children are not left near the spa unsupervised.
-
Attach a self-closing door or lockable gate, fence or child grille.
-
Always cover the whirlpool after use.
•
Warning!
Do not leave children unsupervised when using this hot tub to
minimize the risk of injury.
1.2.3 Electricity and electric shock hazard
•
Warning!
Maintenance and repair work on the electrical components
and any replacement of the power cable may only be carried out by a
qualified electrician.
•
Warning!
The pool is equipped with a residual current device or residual
current circuit breaker (RCCB) at the end of the power cable. The RCCB
must be checked before each use. Do not use the pool if the RCCB is not
working properly. Pull the mains plug until the error has been found and
rectified. Contact a qualified electrician to correct the error. Do not
bypass or open the RCCB. The RCCB must be easily accessible and visible,
with a minimum distance of 1.5 m to the whirlpool.
•
Warning!
The whirlpool must not have an external switching device, e.g.
a timer, or connected to a circuit that is switched on and off by a power
supply at certain times.
•
Warning!
The power supply must meet the product specifications. Do
not connect the device if the power supply does not meet the specified
regulations! Contact your local qualified electrician for more information.
The circuit for the device must be protected via a residual current device
with a rated residual current of max. 30 mA.
•
Warning!
This whirlpool has an earthed connection for an earthed solid
copper wire with a minimum diameter of 4 mm². A ground connection
