Original User Manual
–
A
REBO
S Convector 2300W
17
The airflow is reduced:
•
Check the air intake and outlet. Air inlet and outlet must be free. If necessary, remove dirt.
Observe the minimum distances to walls and objects according to the technical data.
The device does not respond to the infrared remote control:
•
Check if the distance from the remote control to the device is too large and reduce the distance
if necessary.
•
Make sure there are no obstacles, such as furniture or walls, between the device and the
remote control. Pay attention to visual contact between the device and the remote control.
•
Check the state of charge of the batteries and replace them if necessary.
•
Check the batteries for the correct polarity if the batteries have just been replaced.
Hint!
Wait at least 3 minutes after all maintenance and repair work. Only then turn the device back
on. The device is not working properly after the checks: Contact customer service. If necessary, take
the device to an authorized electrician or to AREBOS for repair.
6
Maintenance and cleaning
Activities before maintenance begins
Warning!
from electrical voltage! Do not touch the power plug with damp or
wet hands.
•
Turn off the device.
•
Unplug the power cord from the power outlet by touching it on the power plug.
•
Allow the device to cool completely.
Warning! from electrical voltage! Activities that require the opening of the device may only be
carried out by authorized specialist companies or by AREBOS.
Cleaning the housing
Warning!
from electrical voltage! Never submerge the device under water!
Clean the case with a damp, soft, lint-free cloth. Make sure that no moisture penetrates into the
housing. Make sure that no moisture can come into contact with electrical components. Do not use
aggressive detergents, such as cleaning sprays, solvents, alcohol-containing cleaners, or abrasives to
moisten the cloth. Wipe the housing dry after cleaning.
7
Transport and storage
Hint!
If you store or transport the device improperly, the device may be damaged. Observe the
information on the transport and storage of the device.
Transport
The device is equipped with a handle for easier transport.
Please note the following before each transport:
•
Turn off the device.
•
Unplug the power cord from the power outlet by touching it on the power plug.
•
Do not use the power cord as a pull cord.
•
Allow the device to cool down sufficiently.
