Original User Manual
–
A
REBO
S Convector 2300W
13
•
In case of prolonged non-use, remove the battery.
•
To avoid pollution, take out the used battery and dispose of it safely and properly.
Service:
To operate the convector, point the remote control at the signal receiver. Point the remote control at
the fan heater signal receiver at a distance of up to 6 m.
Connect the power cord
•
Plug the power plug into a properly secured power outlet.
•
Make sure that the power cord is routed behind the device. Never run the power cord in front
of the device!
4
Service
•
Remove the heater and spare parts from the box and place it on a solid, flat floor or work
surface.
•
Before plugging the plug into the outlet, make sure that the power supply in your area matches
the one indicated on the device's nameplate.
•
Set the main button to Off. Plug the power cord into a 220-240V~AC outlet and set the main
switch to "on".
•
Turn on the device by pressing the main switch ON/OFF, the device displays the current room
temperature.
•
Avoid open doors and windows.
Control panel
No.
Designation
Meaning
1
Segment display
Displays all settings, such as the current room
temperature
2
On/Off button
Turn on the device or put it into standby mode
3
Infrared receiver
Receives the signals of the remote control
4
°F/°C button
Switching between °F/ Fahrenheit and °C/Celsius
5
Mode button
Select operating mode: Heating mode
Frost guard mode (if any)
6
Ventilation button
Turn the fan on or off
7
Increase Value button
Set the desired room temperature (5 °C to 37 °C)
8
Reduce Value button
9
Button Timer
Turn timers on and off and set the number of hours
Timer (1 to 24 h)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
