- 23 -
-
the system is fitted with efficient earthing compliant to
the laws and regulations in force.
Earthing is obligatory by law.
If the appliance is not fitted with a cable, use type:
"H05V2V2-F" for a power level of up to 6400 Watts. The
cross-section of the cable should be at least 2.5 mm², or 4
mm² for greater power levels.
The cable should never reach a temperature which is 50°C
above the temperature of the room in which it is installed.
The appliance is designed for permanent connection to the
electricity supply and should therefore be fitted with an
omnipolar switch which has a minimum opening of 3 mm
between contacts. The switch should be suitable for the
charge indicated on the appliance data plate and must
conform to all current legislation (the yellow/green earth
wire must not be interrupted by the switch).
The omnipolar switch must be easy to reach once the
installation process has been completed.
USE AND MAINTENANCE
A = ON/OFF button
B = - button
C = + button
D = Cooking zone selection indicators
E = Cooking zone display
OPERATION (Fig. 2-3-4-5)
- If button A is selected, the hob switches on and flashing
zeroes with decimal points will appear on all displays for
10 seconds.
If no further action is taken within this space of time, the
hob switches off again.
To switch a cooking zone on, simply select the desired
power level using the C buttons.
NOTE: each C button corresponds to a cooking zone.
0 will appear on the display, with the fixed decimal point
D (no longer flashing); at this point the zone has been
selected.
If button B is used the display will show level 9, while if
button C is used, the display will show level 1.
- Once this step is complete you will be able to make tem-
perature adjustments using the "C" and "B" buttons.
If any object has been placed on top of the control panel,
the hob will automatically revert to OFF mode.
When a hotplate is in its OFF mode and the temperature of
the glass surface is greater than approximately 65°, a signal
light "H" will appear on the corresponding cooking zone
display.
- To switch off an individual cooking zone, first select it and
then press buttons "C" and "B" simultaneously.
SAFETY LOCK FUNCTION (Fig. 3-4-5)
To prevent use the cooker surface by children, it is possible
to block all functions by pressing the S key. This function can
be activated only if the hob is switched on.
TIMER (Fig. 3-4)
A Timer can be used simultaneously for each cooking
zone.
Select the desired cooking zone by pressing the
corresponding C button. Next, select the desired power
level using the + and - buttons. If the T (Timer) button is
then pressed, "00" appears on the display and the LED
corresponding to the selected zone begins to flash. Press
button B; a time of 60 minutes will be displayed. If, on
the other hand, you press button T, a time of 1 minute will
be displayed. Next, set the desired time using the T
button to increase the value and the B button to decrease
it.
Once the set cooking time has elapsed, the timer switches
off and deselects the cooking zones. A buzzer will sound
for 2 minutes to indicate that the timer is no longer active.
To deactivate it press any key.
To know the residual time for each zone, press the key
C of the interested zone. To set at zero the timer select
the zone and press the T key contemporaneously with
the keys T and B.
Caution!
While the hob is in operation the timer display remains
on, with its value set to "00".
TIMER (fig. 5)
The Timer can be used simultaneously for each cooking
zone.
Set the desired power level.
Select the Timer by pressing the T button for the relevant
cooking zone; "00" will appear on the display and the
LED above the numbers will begin to flash. Press the B
button; a time of 30 minutes will be displayed. If, on the
other hand, you press the C button, a time of 1 minute
will be displayed. Next, set the desired time using the C
button to increase the value and the B button to decrease
it.
To display the power level or view the remaining time,
simply press the T button for the relevant zone.
Once the set cooking time has elapsed, the timer switches
off and deactivates the cooking zone. A buzzer will
sound for 2 minutes to indicate that the timer is no
longer active. Press any button to deactivate it. To reset
the timer, press the T button and then press the C and B
buttons simultaneously.
IMPORTANT: To prevent damage being inflicted on the
electronic circuits, the hob is fitted with an overheating
safety system.In situations where the appliance is used
at high power levels for a prolonged period of time, the
hob may switchoff one or more of the activated zones
temporarily, until the temperatures return to the set
levels.On the display corresponding to the cooking zone
which has been temporarily switched off, the power level
will be shown in alternation with a H E 2.This will stop
flashing once the cooking zone has beenreactivated.
MINUTE MINDER FUNCTION
(Fig. 3-4-5)
- Unblock the cooking surface by keeping the “key button” S
presseddown for 3 seconds until the “indicator light button”
is switched off.
- Press the “Timer” (T) button until the writing “00” appears
on the display.
- Press T or B to select the number of the minutes.
- Press the “Timer” button to confirm the selection.At the
end of the set time, an acoustic signal will be activated.
HEAT UP FUNCTION (Fig. 2-3-4-5)
The function heat up allows to set the maximum temperatu-
re for a limited period of time on the cooking zone, then the
temperature decreases down to the selected value.
- To activate the Heat up function, select the cooking
zone, set at 9 the temperature level, press again the key
"+" the letter A will appear on the display then with the “-
” key select the desired final temperature level. Until
the function is activated, on the display the A will
alternate with the final set up level.
MAGNETIC SENSOR (fig. 2-3-4-5)
- The hob is equipped with a pan sensor; when the pan is
removed or badly positioned, the
symbol will appear;
If, on the other hand, the surface of the glass is still hot,
the H symbol will appear.
O.S.D. (Overflow Safety Device) (fig. 2-3-4)
The hob is equipped with a safety system which moves all
hotplates to the OFF position and activates the safety
lock when liquids or items are detected on the control
panel A.
These symbols will flash on the display:
. They can be deactivated by removing the
item or the liquid. The hob will switch off automatically.
