p6
M
InPut
InPut
4.4 Programming menu
(according to options)
4.4.1 Programming of the input
a. Process signals
diSPL.
AnA.
JbuS
tor
rELAY
SECU
Pr.diS
Out.P
Out.P
Access to the programming of the input
p6
Access to the programming of the display factor
p8
Access to the programming of the analog output
p8
(option analog output)
Access to the communication parameters
p9
(option digital output)
Access to the programming of the logic inputs
p9
(option TOR)
Access to the programming of the relays (2 or 4 relays)
p9
(option relay output)
Access to the programming of the outputs, the,
p10
relays in case of self-diagnosis and/or sensor
rutpure, and access to disconnecting the sensor rupture
(option analog output or relays)
Access to the programming of the display:
p10
Leds, Bargraph, display brightness
Access to the programming exit menu with or
p11
without saving the configuration
DIP 400
DIP 402
Note:
⇒
Press to go directly to the menu
⇒
In mode programming, the instrument will automatically revert to the
measure with the former configuration if no key is pressed during 1min.
M
Move through the menus / choice
Upwards move /
increase
Downwards move /
decrease
Validation / vertical move
Menu exit / access
M
Note:
Press to go on to the next menu
voltage input
voltage input only
choice of the caliber
to t° sensors
resistive sensors
«
100M
«
«
U
«
InPut
300U
1U
10U
current input
«
MA
«
tYPE
«
CALib
diSPL.
