PMX-4EX-SA Manual
page 78
Rev 3.11
Figure 7.25
a.
Length/Pulse
– Select relationship between number of
pulses and length of movement in terms of inch or
millimeter.
b.
Max Stroke Length
– The largest allowable stroke
length. This will affect the scaling of the DXF viewer box
c.
HS/LS/ACC
- High Speed, Low Speed and Acceleration
settings
d.
Pen Up Routine
– The routine when the XY axis is not in
position
e.
Pen Down Routine
– The routine when the XY axis is in
position
f.
Save & Close
parameters and exit setup
2.
Load DXF File
– browse your PC for a 2D DXF file to load into
the DXF Viewer
3.
Convert File
– Convert the loaded DXF file into PMX-4EX-SA
compatible motion commands. The result will be loaded into the
Motion Conversion Program box. The conversion scaling and
speed will depend on the parameters set in the Parameter setup
box.
Summary of Contents for PMX-4EX-SA
Page 1: ...PMX 4EX SA Manual page 1 Rev 3 11 PMX 4EX SA Advanced 4 Axis Stepper Motion Controller ...
Page 9: ...PMX 4EX SA Manual page 9 Rev 3 11 3 Dimensions 3 1 PMX 4EX SA TBS Dimensions Figure 3 0 ...
Page 10: ...PMX 4EX SA Manual page 10 Rev 3 11 3 2 PMX 4EX SA TB9 Dimensions Figure 3 1 ...
Page 19: ...PMX 4EX SA Manual page 19 Rev 3 11 4 11 PMX 4EX SA Interface Circuit Figure 4 10 ...
