54
CD594
6. Disconnect the choke assembly connector; then
remove the carburetor.
CD591
DISASSEMBLING
1. Remove the two Phillips-head screws securing the
choke assembly; then remove the assembly. Account
for the washers and the O-ring.
2. Remove the Phillips-head screws securing the float
chamber; then remove the chamber. Account for the
seal and the washers.
CD600
3. Remove the float pin; then lift the float with needle
valve from the carburetor body.
CD603
4. Remove the pilot screw assembly. Account for a
spring and O-ring.
CD608
5. Remove the idle adjustment screw assembly.
Account for a spring.
CD610
6. Remove the jet holder; then remove the main jet
from the jet holder.
CD604