Arctic Cat DVX 400 2004, Service Manual

Page: 42 / 153

13
SP189
2. Install Crankcase Separator/Crankshaft Remover (p/
n 0444-009) on the right-side crankcase aligning the
puller screw with the crankshaft; then separate the
crankcase.
SP190
Disassembling Crankcase
Half
1. Remove the alignment pin (5), shift fork shaft (6),
reverse lock shaft (7), shift forks (8), and the shift
cam (9).

NOTE: Note the location of each shift fork for
assembling purposes.
SP191
2. Remove the reverse idler gear and shaft; then remove
the countershaft assembly (1) and driveshaft assem-
bly (2).
SP192
SP193
3. Remove the crank balancer shaft; then using the
Crankcase Separator/Crankshaft Remover (p/n 0444-
009), remove the crankshaft from the crankcase.
SP194
SP195