Arctic Cat DVX 400 2004, Service Manual

Page: 111 / 153

2
Front and Rear
Suspension Assembly
Schematics
0739-246 0739-252
0739-251
Shock Absorbers
REMOVING FRONT SHOCKS
1. Secure the ATV on a support stand to elevate the
wheels and to release load on the suspension.
2. Remove the cap screws and nuts securing each front
shock absorber to the A-arm and frame.
KEY
1. Shock Absorber
2. Cap Screw
3. Cap Screw
4. Nut
5. A-Arm
6. A-Arm
7. Bearing
8. Bearing
9. Dust Seal
10. Dust Seal
11. Spacer
12. Spacer
13. Cap Screw
14. Nut
15. Washer
FRONT SUSPENSION
REAR SUSPENSION
KEY
1. Front Arm Assy
2. Bearing
3. Bearing
4. Grease Fitting
5. Spacer
6. Dust Seal
7. Cap Screw
8. Nut
9. Spacer
10. Spacer
11. Cap Screw
12. Dust Seal
13. Spacer
14. Guard
15. Screw
16. Rear Arm
17. Spacer
18. Cap Screw
19. Nut
20. Cap Screw
21. Shock Absorber
22. Nut
23. Cap Screw
KEY
1. Swing Arm Assy
2. Bearing
3. Bushing
4. Seal
5. Spacer
6. Dust Cover
7. Washer
8. Pivot Shaft
9. Nut
10. Chain Slide
11. Cap Screw
12. Adjuster Plate
13. Adjuster Bolt
14. Washer
15. Circlip
16. Nut
17. Cap Screw
18. Cap Screw
19. Washer
20. Plate
21. Plate
22. Guard Assy
23. Guard
24. Chain Slide
25. Washer
26. Rivet
SWING ARM
27. Cap Screw
28. Cap Screw
29. Washer
30. Cap
31. Boot
! WARNING
Make sure the ATV is solidly supported on the sup-
port stand to avoid injury.